Horizontal Dry-type Volumetric Meter

 Introduction  

This is a horizontal volumetric water meter with the mechanical transmission and dry register, for residential application in sizes 15mm-20mm for cold water. 

  Features  

1. Ensures high sensitivity and accurate registration throughout a wide flow range

2. Low starting flow rate and excellent metrological performance

3. Magnetic drive, lower transmission resistance

4. Magnetic shield use for external magnetic field protection

5. Evacuated and sealed dry dial register ensures clear reading

6. Internal strainer

7. Inlet strainer Standard Compliance Technical data conforms to ISO 4064 Class C, Class D, R160, R200, R315 standard

  Working Conditions  

Water temperature: ≤50ºC for cold water meter 

Water pressure: ≤1MPa or 1.6MPa optional (10bar or 16bar optional) 

  Installation requirements  

1. The meter can be installed in any position

2. Pipeline must be flushed before installation

3. The meter should be constantly full of water during operation

4. The meter must be installed with the direction of the flow as indicated by the arrow cast in the meter body

  Maximum Permissible Error  

In the lower zone from Qmin(Q1) inclusive up to but excluding Qt (Q2) is ±5%

In the upper zone from Qt(Q2) inclusive up to and including Qmax(Q4) is ±2%(cold water meter)